Study table points and functions

1. The angle-adjustable inclined tabletop design allows users to sit up and sit naturally in a comfortable reading and writing posture. And you can freely adjust the angle according to different learning states, such as reading, writing, painting, calligraphy and other states, you can use different desktop angles. On the one hand, users can easily write and read without sharply bending the spine, so that the body can rest on the chair; on the other hand, through the height-adjustable desktop, the visual distance is naturally kept in the scientific position, instead of the traditional desk. You have to try your best to keep your back straight. That is, the table adapts to the human body, not the human body adapts to the table. Tilt ways of common products on the market:

The first generation has only one fixed bevel

The second generation has a fixed slope and a flat (low-grade),

The third generation has a segmented (4-8 segment) adjustable slope (mid-range),

Fourth generation stepless (any position) adjustable slope (high-grade function)

The advantages brought by the free adjustment of the angle of the desktop are not only convenient operation, but also more user-friendly and safer. The desk has entered "the era of humanized fine-tuning of the desktop angle".

2. Height lifting design. Users can freely adjust the height of the desktop that best suits them according to the height of different age groups. Study and work are no longer troubled by height, and they can master a comfortable sitting posture by themselves. The study desk is like a good friend to grow with children. The common lifting methods, according to the order of appearance, are:

The first generation hand lift (after lifting the desktop, it is fixed with a latch, and two people are required to operate)

The second generation hand crank (the operation becomes simple, but it takes time to lift a lot)

The third generation of air pressure (simple operation, fast lifting)

The current manufacturers are developing electric lift tables, which can be controlled by numerical control and remote control in operation, but the cost is too high and it will take time for them to become popular.

3. The practicality of the table board material. Due to its design concept from small to large, the most important material feature of the study table is durability, otherwise it will not take long even if the lifting range is large. Therefore, the traditional solid wood board and painted veneer board are no longer suitable as the board of the study table. In addition, modern study desks derive higher requirements from the perspective of human nature, such as easy scrubbing, soft reflection, and beautiful appearance. Low- and medium-priced products generally use melamine board, which has acceptable physical and chemical properties, but has the defects of easy degumming and cracking when impacted. , anti-wear, anti-deformation ability, is the top table material.

4. Space utilization. A good study table, in addition to its functional utility, is also a piece of furniture, which should be considered from the perspective of space utilization. There should be enough space on the table to place commonly used books and stationery. On the other hand it is a writing desk that may become a computer desk as needed in a few years. A few manufacturers advocate leaving a groove on the front of the table for the child to embed, saying that when writing, the arm can be completely supported by the table and will not hang in the air. More people in the industry think this is inappropriate for two reasons: First, this will undoubtedly reduce the already insufficient desktop area, and it can only be used for writing, and it will be more difficult to use as a computer desk; second, this groove will not As the child grows and grows, will the experience of a 3-year-old child and an 18-year-old adult in this cave be the same? Therefore, it does not conform to the "growing" concept of the study table. 3. The design of restricted activities obliterates the nature of children, and does not conform to the universal concept of furniture design. After the author's test, the conclusion is that as long as the desktop is spacious enough, the arm can be fully supported when writing on the straight edge desktop.

5. The materials are environmentally friendly. The study table is generally used by children since childhood. Children's resistance is much worse than that of adults. Therefore, the formaldehyde emission index must strictly implement the international standard of E1 level or above (the so-called E0 level is a unique standard in China, only equivalent to at the international E1 level). The surface of the plate must be wear-resistant, scratch-resistant and dirt-resistant, and no sharp corners are allowed on the contact surface. The overall structure is strong and not easy to shake. By the way, the highest international standard for such products is: Greenguard for Children.

6. The use of bookends in front of the desk, because the desktop is smooth, tilting the desktop will make the book slide down, so an accessory that can block the book is required. Different manufacturers have different designs for this, the most common are two designs: 1. Aluminum alloy pen groove type bookend, the advantage is that you can place some stationery; 2. PU bookend, excellent skin-friendly, with wrist protection , and it is also very suitable for placing a keyboard on the desktop in the future.

The lifting mechanism of the study table has been formed in five stages through continuous improvement and innovation. Because the difference in production cost is relatively large, these four products currently exist on the market at the same time.